If it is advisable to repair a flat tire, the very first thing to do is take away the wheel. This text teaches you find out how to take away a rear wheel that’s hooked up by a via axle. (If in case you have a quick-release axle, see the how-to particulars right here.)
Store Bikes
Video: Bike Upkeep: Methods to Take away a Rear Wheel with a Through Axle
Eradicating the Wheel
First, put your bike in a restore stand and shift the chain to the smallest cog. For those who’re in the course of your trip or you do not have a motorbike stand, you may flip the bike the other way up to work on it. Shifting to the smallest cog will assist the wheel slide out extra simply.
In case your derailleur has a clutch that will increase rigidity on the chain, flip it off.
Subsequent, loosen the lever on the axle and spin it counterclockwise till all of the threads are utterly free. Assist the wheel and pull the axle out.
To get the wheel out easily, pull down on the tensioning arm and again on the physique of the derailleur. The wheel ought to slide proper out.
Reinstalling the Wheel
Whenever you’re carried out along with your work, it is time to reinstall the wheel. Begin by including a skinny movie of grease to the threads on the axle.
Get the derailleur out of the way in which by pulling it down and again. It additionally helps to verify one of many smallest cogs engages with the higher part of chain.
Examine that the wheel is absolutely seated within the dropouts earlier than reinstalling the axle.
Now reinstall the axle. If the axle does not slide in easily on the primary attempt, take away it and examine the wheel’s alignment earlier than making an attempt once more. Screw within the axle and shut the lever. Ensure that it is tucked out of the way in which and is not touching the bike’s body.
If the lever closes too simply and is touching the body, it is in all probability not tight sufficient. Open the lever and tighten the axle. Then examine every thing once more.
In case your derailleur has a clutch, flip it again on.
End by spinning the pedals and ensuring that the gears shift usually.