With the ability to take away your two-piece crankset is helpful if you wish to clear off your body or work in your chainrings, or if one among your crank arms must be changed. This text and video present you the way.
Store Bike Cranksets
Video: Bike Upkeep: Tips on how to Change a 2-Piece Crankset
#5 hex key
Torque wrench
Backside bracket device
First, elevate the chain off the chainring and relaxation the chain gently on the bearing cap. You may push the tensioning arm ahead to loosen the chain. Then, loosen the pinch bolts on the non-drive-side crank arm, however do not totally take away them.
Now, you should utilize the underside bracket device to take away the plastic pre-load cap, and set the cap apart. (The kind of device required to take away the pre-load cap varies with the model of the crankset, and a few manufacturers don’t have a cap in any respect. Verify with the crankset producer to make certain you may have the proper instruments for eradicating your crankset.)
With the cap off, pull the left crank off the spindle. Then, faucet the top of the spindle along with your hand to loosen it. If it wants some encouragement, gently use a rubber mallet. As soon as the spindle is unfastened, pull the crank and chainrings out the opposite aspect.
Changing the Crankset
If you’re performed along with your work, and it is time to substitute the crank, slide the spindle by means of the bottom-bracket shell and faucet it into place with the heel of your hand.
Change the left crank arm, adopted by the plastic preload cap. Gently tighten the cap along with your backside bracket device.
Subsequent, tighten the pinch bolts on the crank arm, however do not totally tighten one bolt earlier than the opposite. Travel on every bolt till they’re hand tight, after which use your torque wrench to succeed in the desired torque.
End the job by shifting the chain again onto the chainring and shifting by means of the gears to ensure all the things works correctly.